Avery Dennison Medical has partnered with Global Safety First (GSF) to help bring an innovative mask technology to the healthcare market. The NIOSH-Certified N95 face masks use a special air-purifying filter media and a hypoallergenic medical adhesive at the perimeter of the mask to filter more than 95% of particles. The mask utilizes an innovative design that provides a complete perimeter seal with security and protection.
Before use, wearer must read and understand these User Instructions. Keep instructions for reference.
Peel the entire white release liner from the back of the mask and discard the release liner.
Open your mouth as if saying the word “NO” and slide your fingers down the sides of the mask towards your chin until your fingers meet. This will ensure you have enough room to breathe and talk comfortably.
Use your fingers to pinch together the remaining mask. Pull the bottom of the mask flat against your chin pulling it to one side and use your other hand to push against the bottom of your chin to ensure a good seal. Then pull the chin flap the other direction and repeat.
Run your fingers along the perimeter of the mask. If properly donned, the top border should be horizontal across your upper cheek bones towards your ears, not sloping downward. A tab should be formed along the bottom of the chin from the neck to the end of the chin. Make sure the mask is sealed on the underside of the chin.
CHECK THE SEAL
Conduct a User Seal Check by breathing in and out deeply. You should not feel any air leaking along the edges of the mask. Over any area where air is felt, you should apply pressure on those areas and retrace the adhesive seal border.
|CLASS AND EFFICIENCY LEVEL||CONTRAINDICATION||TIME USE LIMITATION|
|This respirator is NIOSH approved as an N95 particulate filter respirator for aerosols free of oil. When properly worn, provides 95% filtration efficiency of 0.3 micron particles as per 42 CFR 84. This is a single-use N95 particulate respirator. This respirator contains no components made from natural rubber latex.||This device is not designed, sold, or intended for use except as indicated. This respirator does not supply oxygen.||If respirator becomes damaged, soiled, or breathing becomes difficult, leave the contaminated area immediately and dispose of the respirator. Discard the used respirator after single use.|
|This respirator helps protect against certain particulate contaminants, but does not eliminate exposure to, or the risk of contracting, any disease or infection. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Failure to follow all instructions and limitations concerning the use of the respirator, and/or failure to wear the respirator for the whole duration of exposure to contaminants, can seriously reduce the performance characteristics of the respirator and lead to sickness or death.||Store unused respirators in a clean, dry, non-contaminated area||*PS Before using these respirators, consult an Industrial Hygienist or Occupational Safety Professional to determine the suitability for your intended use including the following: The type of contaminant(s) for which the respirator is being The concentration level of contaminant(s). Whether the respirator can be properly fitted on the wearer’s Do not use with beards, facial hair, or other conditions that prevent a good seal between the face and the face seal of the respirator. Before use, the wearer must first be trained by the employer in the correct use of the respirator in accordance with applicable safety and health standards for the contaminant and exposure level in the work A written respiratory protection program must be implemented, meeting all the requirements of OSHA 29 CFR 1910.134, including training, medical evaluation and fit testing. If the respirator becomes damaged or breathing becomes difficult, leave the Discard and replace the respirator. This is a single-use particulate No maintenance necessary. Discard the used respirator after a single use. TC 101|
|DO NOT USE AGAINST||S – SPECIAL OR CRITICAL USER’S INSTRUCTIONS||THIS RESPIRATOR IS APPROVED ONLY IN THE FOLLOWING CONFIGURATION|
|Concentrations of contaminants which are unknown or are immediately dangerous to life or Concentrations of particulates which exceed the maximum use concentration or 10 times the OSHA Permissible Exposure Limit, whichever is Gases, vapors, asbestos, paint spray, sandblasting, or particulate materials which generate harmful Oil-based||Skin should be dry and free of If you wear lotion or makeup or have oily skin, you must confirm seal by performing User Seal Check (See Step 6 Check the Seal) Use a mirror to verify mask||PROTECTION
Particulate Filter (95% filter efficiency level) effective against particulate aerosols free of oil time use restrictions may apply
CAUTIONS AND LIMITATIONS|
A – Not for use in atmospheres containing less than 19.5% oxygen.
B – Not for use in atmospheres immediately dangerous to life or health. C – Do not exceed maximum use concentrations established by regulatory standards.
J – Failure to properly use and maintain this product could result in injury or death.
M – All approved respirators shall be selected, fitted, used, and maintained in accordance with MSHA, OSHA and other applicable regulations.
N – Never substitute, modify, add or omit parts.
O – Refer to user’s instructions, and/or maintenance manuals for information on use and maintenance of these respirators.
S – Special or critical User's Instructions and/or specific use limitations apply. Refer to User's Instructions before donning